Kenwood NXR-1700 Function Reference page 34

1 FUNCTIONS AND PANEL LAYOUT / 1.3 OLED display
Icon List
The following are the icons which are used on the OLED display:
Icon NORMAL /
MENU
NORMAL
NORMAL
NORMAL
NORMAL
NORMAL
NORMAL
ERROR
Control
Control
Control
FUNC (E)/ Ver 2.00
Table 1-7 Icon List
Function
Electric field strength
: Strong electric field
: Medium electric field
: Weak electric field
: Very weak electric field
: No carrier
TX Power
Headset connected
Monitor ON
Take Over
Repeat Disable
Error state present
Volume
Mic Gain
Displayed at the beginning of
the line of the selected value.
33
Remarks
The electric field is displayed when RX is
received.
When a carrier is being detected, the
electric field strength is displayed even if
the signal is not the waited signal.
When a DMR signal is received on a DMR
standby channel, the electric field strength
of Slot with the stronger electric field
strength is displayed.
：High
：Low
Not displayed when the TX frequency is not
configured.
Lights when the headset is connected.
Lights when the monitor is turned on.
Lights when Take Over is enabled.
Lights in the Repeat Disable state.
Lights when the Error state is present.
1 to 32
The received audio volume of the headset is
adjusted between 1 to 32.
The received audio volume of the headset
cannot be adjusted to 0 (zero).
1 to 32
The microphone volume of the headset is
adjusted between 1 to 32.
The microphone volume of the headset cannot
be adjusted to 0 (zero).
-