Kenwood NXR-1700 Function Reference page 188
Hide thumbs
Also See for NXR-1700:
- Service manual (124 pages) ,
- Instruction manual (25 pages) ,
- Instruction manual (5 pages)
Table of Contents
Advertisement
13 MANAGING DEVICES ON AN IP NETWORK (SNMP) / 13.1 SNMP
Configuration using KPG-D7
・
Configuring SNMP Interface to be enabled or disabled ( Edit > SNMP Settings > SNMP Interface)
Configuring Community Name ( Edit > SNMP Settings > Community Name)
・
Configuring Trap Destination Address 1 to 4 ( Edit > SNMP Settings > Trap Destination Address 1 to 4)
・
Configuring Status of Trap Event (General) to be enabled or disabled ( Edit > SNMP Settings > Trap Event
・
(General) > Status)
Configuring Control of Trap Event (General) to be enabled or disabled ( Edit > SNMP Settings > Trap Event
・
(General) > Control)
Configuring Warning of Trap Event (General) to be enabled or disabled ( Edit > SNMP Settings > Trap Event
・
(General) > Warning)
Configuring Error of Trap Event (General) to be enabled or disabled ( Edit > SNMP Settings > Trap Event
・
(General) > Error)
・
Configuring Common of Trap Event (Hardware) to be enabled or disabled ( Edit > SNMP Settings > Trap Event
(Hardware) > Common)
Configuring Voltage of Trap Event (Hardware) to be enabled or disabled ( Edit > SNMP Settings > Trap Event
・
(Hardware) > Voltage)
・
Configuring PLL of Trap Event (Hardware) to be enabled or disabled ( Edit > SNMP Settings > Trap Event
(Hardware) > PLL)
Configuring Consumption of Trap Event (Hardware) to be enabled or disabled ( Edit > SNMP Settings > Trap
・
Event (Hardware) > Consumption)
・
Configuring Temperature of Trap Event (Hardware) to be enabled or disabled ( Edit > SNMP Settings > Trap
Event (Hardware) > Temperature)
Configuring AUX Port of Trap Event (Hardware) to be enabled or disabled ( Edit > SNMP Settings > Trap Event
・
(Hardware) > AUX Port)
FUNC (E)/ Ver 2.00
187
Advertisement
Table of Contents
