Kenwood NXR-1700 Function Reference page 162

12 CONVENTIONAL IP NETWORK / 12.3 Restricting Transmission to Avoid Interference with Other
Communications (Cross-busy)
If transmission starts by using the Repeat PTT control or Network PTT control having a higher priority during
transmission:
Configuration for
Cross-busy
Enabled
Disabled
During transmission by using the Repeat PTT control or Network PTT control:
Configuration for
Cross-busy
Enabled
Disabled
If the Repeat PTT control or Network PTT control is enabled:
Configuration for
Cross-busy
Enabled
Disabled
Note
 Cross-busy can be configured only if Conventional IP Network is enabled in Product Information.
Configuration using KPG-D7
 Configuring Cross-busy to be enabled or disabled ( Edit > Conventional IP Network > General > Cross-busy)
FUNC (E)/ Ver 2.00
Table 12-6 Cross-busy 3
The Status of Repeat Disable/
Enable
Repeat Enable
Repeat Disable
Repeat Enable
Repeat Disable
Table 12-7 Cross-busy 4
The Status of Repeat Disable/
Enable
Repeat Enable (No change)
Repeat Enable → Repeat Disable
Repeat Enable (No change)
Repeat Enable → Repeat Disable
Table 12-8 Cross-busy 5
The Status of Repeat Disable/
Enable
Repeat Disable (No change)
Repeat Disable → Repeat Enable
Repeat Disable (No change)
Repeat Disable → Repeat Enable
The Behavior of the Repeat PTT
control, Network PTT control or
Console PTT control
Starts a new transmission
Starts a new transmission
Starts a new transmission
Does not transmit
The Behavior of the Repeat PTT
control, Network PTT control or
Console PTT control
Continues transmission
Continues transmission
Continues transmission
Stops transmission
The Behavior of the Repeat PTT
control, Network PTT control or
Console PTT control
Continues to stop transmission
Starts transmission
Continues to stop transmission
Starts transmission
161