12 CONVENTIONAL IP NETWORK / 12.7 SIP Phone
Item
Description
Transmit Operation
SIP Phone dialing
operation
Destination
DMR Mode: DMR ID
NXDN Mode: NXDN ID
・
・
・
・
Ring Back Tone
Sounds
Ring Tone
Sounds
Busy Tone
Does not sound.
Receive Operation
Individual Call
Group Call
Remarks
FUNC (E)/ Ver 2.00
Table 12-14 In the Case of a SIP Phone Call to PABX
Entry: The desired number
Based on the desired number notified from a SIP Phone, Asterisk notifies the repeater
of a call request according to the configuration.
In DMR Mode, the entered number is converted to the desired DMR ID according to
the Asterisk configuration.
In NXDN Mode, the entered number is converted to the desired NXDN ID according to
the Asterisk configuration.
The repeater notifies the transceiver of a call request with the DMR ID and NXDN ID
notified by Asterisk.
Sounds according to the RTP generated by the repeater.
Sounds according to the RTP generated by the repeater.
Because the repeater does not detect whether the transceiver
is busy, the repeater sends the same RTP as Ring Back Tone
and Ring Tone.
PTT is pressed on the transceiver.
PTT is pressed on the transceiver.
In DMR Mode, the repeater notifies the transceiver of the caller ID of a call request as
FFFEE1. The configuration of Asterisk is required for notification.
In NXDN Mode, the repeater notifies the transceiver of the caller ID of a call request as
FFF5. The configuration of Asterisk is required for notification.
177