Kenwood NXR-1700 Function Reference page 60

2 GETTING STARTED / 2.4 System Structure
Analog Mode
A digital protocol license (DMR license, NXDN license) is not required if NXR-1700/ NXR-1800 is used only on analog
channels. The condition in which a digital protocol license is not assigned is called Analog Mode.
In Analog Mode, NXR-1700/ NXR-1800 behaves as an analog repeater.
In Analog Mode, an Analog IP Conventional system using multiple NXR-1700/ NXR-1800 can be structured.
Sender
NXR-1700/ NXR-1800
Transmission by Conventional IP Network is enabled between NXR-1700/ NXR-1800 in Analog Mode.
Note
Repeater programming needs to be done by using the FPU dedicated to the repeater.
・
Conventional IP Network of Analog Mode cannot be used in combination with TKR-Dx10 series/ NXR-x10 series.
・
FUNC (E)/ Ver 2.00
Table 2-6 Supported Transmission of Conventional IP Network
Receiver
DMR Mode Refer to
NXDN Mode
Analog Mode Refer to
NXR-1700/ NXR-1800
DMR Mode NXDN Mode
DMR Mode.
－ Refer to
DMR Mode.
59
Analog Mode
Refer to DMR
－
NXDN Mode －
－ ✔
Mode.