Kenwood NXR-1700 Function Reference page 197

14 IP INTERFACE FUNCTION / 14.2 Voice Logging
Configuration
Maximum Number of
Talk Path
Configuration using KPG-D7
Configuring Voice Logger ID ( Edit > Voice Logger > Voice Logger List > Voice Logger ID)
・
Configuring Valid ( Edit > Voice Logger > Voice Logger List > Valid)
・
Configuring IP Address ( Edit > Voice Logger > Voice Logger List > IP Address)
・
・ Configuring Port ( Edit > Voice Logger > Voice Logger List > Port)
Configuring Maximum Number of Talk Path ( Edit > Voice Logger > Voice Logger List > Maximum Number of Talk
・
Path)
FUNC (E)/ Ver 2.00
Description
The highest number of voice calls that are sent to Voice Logger is displayed.
The number of voice calls that are sent to Voice Logger is restricted by limiting the
configured value of Maximum Number of Talk Path as the maximum value. The number of
voice calls is increased by 1 when a voice call is initiated. The number of voice calls is
decreased by 1 when a voice call ends.
If the total number of voice calls exceeds the configured value of Maximum Number of
Talk Path, the excess voice calls are not sent to Voice Logger.
In DMR Mode, the maximum number of concurrent calls is "2" when Slot 1 and Slot 2 are
used at the same time. Therefore, Maximum Number of Talk Path configured for the
repeater is "1" or "2".
If "3" or greater is configured in Maximum Number of Talk Path in KPG-D7 version V1.01
or earlier, the configured value in Maximum Number of Talk Path is corrected to "2" if
KPG-D7 version V2.00 or later is used.
Because multiple calls are not made at the same time in Analog Mode, the value in
Maximum Number of Talk Path configured for the repeater is "1".
196