Kenwood NXR-1700 Function Reference page 85

4 TRANSMISSION/ RECEPTION/ REPEAT / 4.6 Configuring the Duration of Transmission in the Received Mode
(Signaling Reset Timer)
Receiving Conditions
2) The reception of the analog signal in 1) has been completed, and the
length of time configured in Signaling Reset Timer elapses.
3) Currently, no signal is being received on the mixed channel used by
the repeater for transmission. Or, the repeater is receiving an analog
signal or a DMR digital signal or an NXDN digital signal for which the
signaling received by the repeater and the signaling configured for the
repeater do not match.
〇:
Depends on the configuration in Transmit Mode
△:
Transmits in DMR/ NXDN mode
□:
Transmits in analog mode
FUNC (E)/ Ver 2.00
Transmit Mode
DMR/ NXDN
84
Communication Method
for Transmission Using the
PTT (Test PTT and External
PTT) control
DMR/ NXDN