Kenwood NXR-1700 Function Reference page 67

2 GETTING STARTED / 2.4 System Structure
Steps to Construct Hot Standby (Example)
This section describes the steps to construct the Hot Standby by using NXR-1700_A and NXR-1700_B.
NXR-1700_A (Site 1): Operated as 172.16.0.1 (IP Address) and Hot Standby (Main side).
・
・ NXR-1700_B (Site 1): Operated as 172.16.0.2 (IP Address) and Hot Standby (Sub side).
NXR-1700_C (Site 2): Operated as 172.16.1.3 (IP Address) and a non-Hot Standby site.
・
Virtual IP Address (Site1)： 172.16.0.99
・
1 Configuring the Web Tool
Each item of the Web Tool is configured.
Item
Hot Standby Valid
Mode
Monitoring IP Address
Failsoft Mode Failsoft Mode Wait Timer (sec)
Auto Active Status Valid
Switch
Switch Time
Interval (day)
Virtual IP Address IP Address
FUNC (E)/ Ver 2.00
Figure 2-5 Construction Image
Table 2-12 Configuration Items of the Web Tool
NXR-1700_A
ON
Main
172.16.0.2
(IP Address of the Sub side)
Arbitrary value
Arbitrary
Arbitrary
Arbitrary
172.16.0.99
66
NXR-1700_B
ON
Sub
172.16.0.1
(IP Address of the Main
side)
The same value as the
Main side
-
-
-
172.16.0.99
(The same value as the
Main side)