Kenwood NXR-1700 Function Reference page 199

14 IP INTERFACE FUNCTION / 14.2 Voice Logging
Configuration Description



Configuration using KPG-D7
Configuring Default Voice Logger ID ( Edit > Voice Logger > Target UID > Default Voice Logger ID)
・
・ Configuring UID Range (Min) ( Edit > Voice Logger > Target UID > UID Range (Min))
Configuring UID Range (Max) ( Edit > Voice Logger > Target UID > UID Range (Max))
・
Configuring Voice Logger ID ( Edit > Voice Logger > Target UID > Voice Logger ID)
・
Target GID
In Target GID, a GID targeted for recording and the list of Voice Logger to be the destination of a recording can be
confirmed, and a GID targeted for recording to each Voice Logger can be edited.
Configuration Description
Default Voice The Voice Logger to be the destination of a recording of a Group Call using anything other a
Logger ID GID configured in Target GID is configured. If no configuration of Target GID exists, all Group
Calls are recorded to the Voice Logger of Default Voice Logger ID.
・
・
・
・
・
All Group Call The Voice Logger to be the destination of a recording of an All Group Call is configured.
Voice Logger ID
Unaddress Call The Voice Logger to be the destination of a recording of an Unaddress Call is configured.
Voice Logger ID
For a call by a SIP Phone, Unaddress Call is not supported.
FUNC (E)/ Ver 2.00
The Voice Logger to record an Individual Call is selected from Voice Logger List. The
configuration is done by specifying the Voice Logger ID.
If Voice Logger ID is not configured, an Individual Call is not recorded to the Voice Logger.
An Individual Call sent from a SIP Phone is also recorded in the same way.
Table 14-5 Target GID
The Voice Logger to record a Group Call is selected from Voice Logger List. The
configuration is done after specifying the Voice Logger ID.
This is the destination of a recording of a Group Call of anything other than a GID
configured in Target GID.
If Default Voice Logger ID is not configured, a Group Call is not recorded to the Voice
Logger.
A voice call by Analog reception is transferred to a network with an Analog GID as the
destination. An Analog voice call can be recorded by configuring an Analog GID in Target
GID.
In Analog Mode, A voice call by Analog reception can be recorded by the Voice Logger
configured in Default Voice Logger ID.
198