Kenwood NXR-1700 Function Reference page 217

19 TEST CONSOLE / 19.4 Configuring the Test Console
Console IP Address
The IP address of the port recognized on the device where the application is executed is displayed by the dropdown list,
and the IP address is selected.
Default:
If a PC has one IPv4 address: IP address of the PC
If a PC has more than one IPv4 address: Blank (selected by using the dropdown list)
Anything other than the above: Blank
Console ID
A Console ID of the Test Console is configured. Registration in Console List of the repeater is required.
Default: 1
Repeater IP Address
An IP address of the connected repeater is configured.
Default: The IP address configured in the repeater targeted for Download
Channel Spacing (NXDN Mode Only)
The Channel Spacing used for transmission is configured.
Default: The Channel Spacing (NXDN) configuration of the channel selected in the downloading repeater
Type configuration
"Individual" or "Group" is selected.
Default: Group
If "Individual" is selected
A voice call to an Individual ID configured in ID of the Dispatch box can be made.
An Individual Call to a Console ID can be received.
If "Group" is selected
A voice call to a GID configured in ID of the Dispatch box can be made.
An Individual Call to a Console ID can be received.
A voice call to a GID configured in ID of the Dispatch box can be received.
ID configuration
An ID for the trial voice communication is configured.
1 to 16776415 (DMR Mode), 1 to 65519 (NXDN Mode)
・Individual
1 to 16776415, ALL, Unaddress (DMR Mode)
・Group
1 to 65519, ALL (NXDN Mode)
Default: 1
FUNC (E)/ Ver 2.00
216