Kenwood NXR-1700 Function Reference page 38

1 FUNCTIONS AND PANEL LAYOUT / 1.3 OLED display
Only the following OLED display menus are available if the repeater starts with an Unprogrammed error:
Layer Item
Repeater Model Name
Information Market Code
Serial Number
NXDN ESN
Firmware Version
License
Host IP Address
Subnet Mask
Default Gateway
Network
MAC Address
Information
*1
Edit
Control Scroll Direction
Power Off
Back
Home
Exit Exit
*1
Displayed only when the admin password of the Web Tool is not configured.
*2 The background color inversion moves up if the Knob is rotated clockwise in Direction 1 (default), and the background
color inversion moves down if the Knob is rotated clockwise in Direction 2.
If the repeater starts with an Unprogrammed error, the repeater normally enters the state where Knob Lock is deactivated
and the state where Power Control is enabled, and Screen Off Timer does not function.
FUNC (E)/ Ver 2.00
Table 1-9 Menu List (When an Unprogrammed Error Occurs)
Description
Model name
Market code
Serial number of the main unit
Displaying NXDN ESN
Firmware version
Type of the assigned license
Displaying the IP address of the main
unit
Displaying the subnet mask
Displaying the Default Gateway address
Displaying the MAC address
Moves to the edit menu of Host IP
Address, Subnet Mask, and Default
Gateway if Edit is selected and the Knob
is pressed.
Switches the vertical scroll direction of
OLED display Menu when rotating the
Knob. *2
Powering off the power source
Returns to the previous Level.
Returns to the Unprogrammed error
display.
Returns to the Unprogrammed error
display.
37
Remarks
Read Only
Read Only
Read Only
Read Only
Read Only
Read Only
Read Only
Read Only
Read Only
Read Only
-
Upper row: Direction 1
Lower row: Direction 2
Upper row: Cancel
Lower row: Execute
-
-
-