Kenwood NXR-1700 Function Reference page 86

4 TRANSMISSION/ RECEPTION/ REPEAT / 4.6 Configuring the Duration of Transmission in the Received Mode
(Signaling Reset Timer)
If "Off" is configured in Signaling Reset Timer, the length of time is no longer restricted, and the repeater transmits by
using the PTT (Test PTT and External PTT) control in the mode where the repeater previously received a signal. This
condition is reset if a channel is changed, if the software is re-started, or if the repeater is turned off.
Receiving Conditions
If conditions 1) and 2) below are both satisfied:
1) The repeater has never received an analog signal or a DMR digital
signal or an NXDN digital signal for which the signaling received by
the repeater and the signaling configured for the repeater match.
2) Currently, no signal is being received on the mixed channel used by
the repeater for transmission. Or, the repeater is receiving an analog
signal or a DMR digital signal or an NXDN digital signal for which the
signaling received by the repeater and the signaling configured for the
repeater do not match.
The repeater is receiving a DMR digital signal or an NXDN digital signal
for which the signaling received by the repeater and the signaling
configured for the repeater match.
If conditions 1) and 2) below are both satisfied:
1) The repeater has received a DMR digital signal or an NXDN digital
signal for which the signaling received by the repeater and the
signaling configured for the repeater match.
2) Currently, no signal is being received on the mixed channel used by
the repeater for transmission. Or, the repeater is receiving an analog
signal or a DMR digital signal or an NXDN digital signal for which the
signaling received by the repeater and the signaling configured for the
repeater do not match.
The repeater is receiving an analog signal for which the signaling
received by the repeater and the signaling configured for the repeater
match.
If conditions 1) and 2) below are both satisfied:
1) The repeater has received an analog signal for which the signaling
received by the repeater and the signaling configured for the repeater
match.
FUNC (E)/ Ver 2.00
Table 4-8 Signaling Reset Timer (Off)
85
Transmit Mode Communication Method
for Transmission Using the
PTT (Test PTT and External
PTT) control
Analog Analog
DMR/ NXDN DMR/ NXDN
Analog DMR/ NXDN
DMR/ NXDN DMR/ NXDN
Analog DMR/ NXDN
DMR/ NXDN DMR/ NXDN
Analog Analog
DMR/ NXDN Analog
Analog Analog
〇
△
△
□
□