Knob - Kenwood NXR-1700 Function Reference

1 FUNCTIONS AND PANEL LAYOUT / 1.5 KNOB

KNOB

1.5
Power On/Off
The Power On/Off control is performed according to the Power Control configuration.
Configuration Item
Disable
Enable
Note
・ To turn the power on and off by the Knob operation, Power Control needs to be enabled by the FPU.
Configuration using KPG-D7
Configuring Power Control ( Edit > Optional Features > Other > Power Control)
・
FUNC (E)/ Ver 2.00
Table 1-28 Configuration of Power Control
Description
When energized at the rated voltage (13.2 V, the power supply voltage range DC 10.8 V to
DC 15.6 V), the Power On behavior is performed automatically.
The Knob operation cannot be used to Power Off or On.
While in the Power Off state, Power On is performed by pressing the Knob.
When in the Power On state, Power Off is available from the OLED display menu.
51