Kenwood NXR-1700 Function Reference page 180

12 CONVENTIONAL IP NETWORK / 12.7 SIP Phone
Target SIP Phone ID
In Target SIP Phone ID, the Voice Logger to be the destination of a recording of an Individual Call made from the
transceiver by using a Paging Call to a SIP Phone can be configured.
Configuration
Default Voice Logger ID
SIP Phone ID Range
(Min-Max)
(DMR Mode Only)
Voice Logger ID
(DMR Mode Only)
FUNC (E)/ Ver 2.00
Table 12-16 Target SIP Phone ID
Description
The Voice Logger to be the destination of a recording of an Individual Call addressed to
a SIP Phone using anything other than the SIP Phone ID configured in Target SIP Phone
ID is configured. Target SIP Phone ID is configured. If no configuration of Target SIP
Phone ID exists, all Individual Calls made from the transceiver to a SIP Phone are
recorded to the Voice Logger of Default Voice Logger ID.
 The Voice Logger to record an Individual Call addressed to a SIP Phone is selected
from Voice Logger List. The configuration is done by specifying the Voice Logger ID.
 This is the destination of a recording of an Individual Call addressed to a SIP Phone
of anything other than a SIP Phone ID configured in Target SIP Phone ID.
 If Default Voice Logger ID is not configured, recording is not executed.
 In DMR Mode, all Individual Calls made by using DTMF from the transceiver to a
SIP Phone are recorded to the Voice Logger of Default Voice Logger ID.
SIP Phone ID Range (Min) and SIP Phone ID Range (Max) are the functions to
configure the minimum value and maximum value of the SIP Phone ID range targeted
for recording. SIP Phone ID Range (Min) and SIP Phone ID Range (Max) can be used
only in DMR Mode.
SIP Phone ID Range (Min)
This is the minimum value of SIP Phone ID targeted for recording.
SIP Phone ID Range (Max)
This is the maximum value of SIP Phone ID targeted for recording.
The same ID can be entered in SIP Phone ID Range (Min) and SIP Phone ID Range
(Max). In this case, the ID is handled as a single SIP Phone ID. For example, if the
configurations are SIP Phone ID Range (Min) = 10 and SIP Phone ID Range (Max) = 10,
only voice calls of the destination SIP Phone ID = 10 are recorded in the Voice Logger
configured for the specified Voice Logger ID.
The Voice Logger to be the destination of a recording for a SIP Phone ID targeted for
recording specified in SIP Phone ID Range is configured.
The Voice Logger to record an Individual Call addressed to a SIP Phone with a SIP
Phone ID specified in SIP Phone ID Range as the destination is configured. It is selected
from Voice Logger List.
179