Kenwood NXR-1700 Function Reference page 172

Hide thumbs Also See for NXR-1700:
Table of Contents

Advertisement

12 CONVENTIONAL IP NETWORK / 12.7 SIP Phone
Configuration
Password
(SIP Authentication)
Slot
(DMR Mode Only)
FUNC (E)/ Ver 2.00
Description
This timer is used to prevent a Phone Call from being held for overly long, such as when
no response of audio packets from the transceiver or Console occurs for a certain period
of time. A system administrator can structure a system that suits the operation
environment of the system by configuring this timer.
Unlimited
The disconnection of a call is not performed when the length of time elapses.
20 sec to 120 sec
If an audio packet from the transceiver or Console cannot be detected after a Phone Call
is established, this timer is activated. The timer stops if an audio packet is detected before
the length of time configured in Reply Timeout on Outgoing Call elapses. The
communication of a Phone Call is disconnected when the length of time configured in
Reply Timeout on Outgoing Call elapses.
Password is the function to configure the password for the session connection between a
SIP Phone Server and the repeater.
Configure and use the same value as the password linked to the SIP User ID of the
repeater configured for the SIP Phone Server. The use of a password to connect sessions
depends on the configuration of the SIP Phone Server. In the connection of a session, the
repeater performs session connection to the SIP Phone that uses the configured
password when the request for a password is received from the SIP Phone Server.
If a password is not configured
This is used if a password is not used for the session connection to a SIP Phone Server.
A password is not applied to the REGISTER and INVITE methods.
If a password is configured
The repeater performs session connection to a SIP Phone by using the configured
password when the request for a password is received from a SIP Phone Server.
The configured password is applied to the REGISTER and INVITE methods.
Slot is the slot to assign a call with the repeater when a call request is received from a SIP
Phone.
171

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nxr-1800Nxr-1700eNxr-1800eNxr-1800e2

Table of Contents