12 CONVENTIONAL IP NETWORK / 12.7 SIP Phone
Note
・
In DMR Mode, Phone Call communication from the transceiver can be made in 2 slots for each repeater.
All Group Call and Unaddress Call are not supported for a call by a SIP Phone.
・
Communications using Scrambler, AES/DES Encryption, and ARC4 Encryption are not supported for a call by a
・
SIP Phone.
・
Priority for a Phone Call made from a SIP Phone Server can be changed by the SIP PTT.
A Phone Call made from the transceiver is treated as the Repeat PTT.
・
If another SIP PTT occurs during the SIP PTT, the first SIP PTT is retained and the later SIP PTT is rejected.
・
Configuration using KPG-D7
Configuring SIP Phone to be enabled or disabled ( Edit > SIP Phone > SIP Phone Server > SIP Phone)
・
・
Configuring Address ( Edit > SIP Phone > SIP Phone Server > SIP Phone Server > Address)
Configuring Port ( Edit > SIP Phone > SIP Phone Server > SIP Phone Server > Port)
・
Configuring Enable TLS to be enabled or disabled ( Edit > SIP Phone > SIP Phone Server > Enable TLS)
・
Configuring Expires [s] ( Edit > SIP Phone > SIP Phone Server > SIP Phone Timers > Expires [s])
・
・
Configuring Maximum Conversation Time [s] ( Edit > SIP Phone > SIP Phone Server > SIP Phone Timers >
Maximum Conversation Time [s])
Configuring Reply Timeout on Outgoing Call [s] ( Edit > SIP Phone > SIP Phone Server > SIP Phone Timers >
・
Reply Timeout on Outgoing Call [s])
・
Configuring Password (SIP Authentication) ( Edit > SIP Phone > SIP User ID > SIP Authentication > Password)
Configuring SIP User ID ( Edit > SIP Phone > SIP User ID > SIP User ID)
・
Configuring SIP User ID Name ( Edit > SIP Phone > SIP User ID > SIP User ID Name)
・
・
Configuring PSTN Prefix ( Edit > SIP Phone > SIP User ID > PSTN Prefix)
Configuring PABX Prefix ( Edit > SIP Phone > SIP User ID > PABX Prefix)
・
FUNC (E)/ Ver 2.00
173