Kenwood NXR-1700 Function Reference page 167

12 CONVENTIONAL IP NETWORK / 12.6 Using Console
Transmission Behavior of Console
If the Console PTT control is enabled by receiving a call request from a Console and transmission is enabled, the
repeater starts RF transmission of audio and data packets received from the Console, and the repeater transmits to
other sites, according to the configuration of PTT Priority. In this case, if the channel is a channel with User List
enabled, whether an ID sent by the Console PTT control is permitted in User List is also checked.
Note

If Repeat Disable is enabled, the repeater cannot transmit using the Console PTT control.
Reception Behavior of Console
For a Console to receive audio or data from the transceiver, the Unit ID and Group ID of the Console need to be
registered in the repeater by a Registration request of Console Interface.
If a digital signal is received from a subscriber unit and transmission is started using the Repeat PTT control, or if an
Intersite Call is received from another repeater connected by the IP and transmission is started using the Network PTT
control, the repeater starts transmission of audio or data packets for the Console when the ID of this communication
matches the ID preconfigured for the Console.
166
FUNC (E)/ Ver 2.00