Kenwood NXR-1700 Function Reference page 179

12 CONVENTIONAL IP NETWORK / 12.7 SIP Phone
Item Description
Transmit Operation SIP Phone dialing
operation
Destination DMR Mode: DMR ID
NXDN Mode: NXDN ID
・
・
・
・
Ring Back Tone Sounds
Ring Tone Sounds
Busy Tone Does not sound.
Receive Operation Individual Call
Group Call
Remarks
・
・
・
FUNC (E)/ Ver 2.00
Table 12-15 In the Case of a SIP Phone Call to PSTN
Entry: PSTN Phone Number
When a call request is received from a SIP Phone to the PSTN Phone Number,
Asterisk notifies the repeater of a call request according to the configuration.
In DMR Mode, a PSTN Phone Number is converted to the desired DMR ID according
to the Asterisk configuration.
In NXDN Mode, a PSTN Phone Number is converted to the desired NXDN ID
according to the Asterisk configuration.
When a call request is received from Asterisk, the repeater notifies the transceiver of
the call request with the DMR ID and NXDN ID notified by Asterisk.
Sounds according to the RTP generated by the repeater.
Sounds according to the RTP generated by the repeater.
Because the repeater does not detect whether the transceiver
is busy, the repeater sends the same RTP as Ring Back Tone
and Ring Tone.
PTT is pressed on the transceiver.
PTT is pressed on the transceiver.
For a telephone from PSTN, the destination phone number is the phone number
(PSTN Phone Number) obtained from the PSTN service subscription.
In DMR Mode, the repeater notifies the transceiver of the caller ID of a call request as
FFFEE0. The configuration of Asterisk is required for notification.
In NXDN Mode, the repeater notifies the transceiver of the caller ID of a call request as
FFF5. The configuration of Asterisk is required for notification.
178