Kenwood NXR-1700 Function Reference page 123

7 DMR DIGITAL COMMUNICATIONS / 7.8 Limiting the IDs for Repeat Transmission (User List (GID)/ User List
(UID))
Configuring User List to Be Enabled or Disabled (User List (GID)/ User List (UID))
Whether the configurations of User List (GID) and User List (UID) are enabled or disabled can be configured for each
channel by using KPG-D7.
In a system where user limit is used, all UIDs may be temporarily enabled for a reason such as an operation check.
With this function, a system administrator can temporarily release the right to use the repeaters without deleting the
User List (GID) and User List (UID).
If this function is enabled, the repeater sends only calls using the ID permitted in the User List (GID) and User List (U
ID) to a receiving subscriber unit.
If this function is disabled, the repeater sends all calls made using the digital signal to the receiving subscriber unit.
However, the received Color Code needs to match the Color Code preconfigured for the repeater as the basic
condition to repeat in all cases.
According to the configuration of User List (GID) and User List (UID), the repeater behaves as follows:
Configuration
User List (GID) None
GID List
GID Range List
User List (UID) None
UID List
UID Range List
FUNC (E)/ Ver 2.00
Table 7-8 User List (GID)/ User List (UID)
Description
GID List and GID Range List are disabled.
GID List is enabled, and GID Range List is disabled.
In order to repeat a Group Call, the use of the repeater needs to be permitted
for the target GID.
(Refer to Configuring the GIDs Permitted for Repeat Transmission (GID
List).)
GID Range List is enabled, and GID List is disabled.
In order to repeat a Group Call, the use of the repeater needs to be permitted
for the target GID.
(Refer to Configuring the GIDs Permitted for Repeat Transmission All at
Once (GID Range).)
UID List and UID Range List are disabled.
UID List is enabled, and UID Range List is disabled.
In order to repeat an Individual Call or Group Call, the use of the repeater
needs to be permitted for the received UID.
(Refer to Configuring the UIDs Permitted for Repeat Transmission (UID
List).)
UID Range List is enabled, and UID List is disabled.
In order to repeat an Individual Call or Group Call, the use of the repeater
needs to be permitted for the received UID.
(Refer to Configuring the UIDs Permitted for Repeat Transmission All at
Once (UID Range).)
122