Kenwood NXR-1700 Function Reference page 125

7 DMR DIGITAL COMMUNICATIONS / 7.8 Limiting the IDs for Repeat Transmission (User List (GID)/ User List
(UID))
Configuration
Selected Channel
Local
1 to 64 (Available number
of Site Group Table)
Note
 The calling repeater of an Intersite Call makes the Intersite Call by the transmission of the received signal to an IP address
configured using the FPU at the same time as the start to repeat transmission by the receipt of a digital signal or analog signal
from the transceiver or by the receipt of a packet from a Console.
Configuration using KPG-D7
Configuring Site Group (GID List) ( Edit > User List > GID List > Site Group)
・
Configuring Site Group (GID Range List) ( Edit > User List > GID Range List > Site Group)
・
・ Configuring Site Group (UID List) ( Edit > User List > UID List > Site Group)
Configuring Site Group (UID Range List) ( Edit > User List > UID Range List > Site Group)
・
Configuration using Web Tool
Configuring Site Group (GID List) ( Edit > User List > GID List > GID List > Site Group)
・
Configuring Site Group (GID Range List) ( Edit > User List > GID Range List > GID Range List > Site Group)
・
Configuring Site Group (UID List) ( Edit > User List > UID List > UID List > Site Group)
・
・ Configuring Site Group (UID Range List) ( Edit > User List > UID Range List > UID Range List > Site Group)
FUNC (E)/ Ver 2.00
Table 7-9 Site Group
Description
The repeater initiates the Intersite Call according to the Site List configured for the selected
channel.
No Intersite Call is initiated. The repeater transmits by only relaying the received signals.
The repeater initiates the Intersite Call according to the configuration of the Site Group Table for
the configured number.
(Refer to Configuring the Target of an Intersite Call (Site Group
124
Table).)