Kenwood NXR-1700 Function Reference page 33

1 FUNCTIONS AND PANEL LAYOUT / 1.3 OLED display
FUNC (E)/ Ver 2.00
Subnet Mask edit screen
Subnet Mask is configured in the range from 255.0.0.0 to
255.255.255.252.
Because the 1st octet is fixed at 255, configuration is done in order
from the 2nd octet.
・
The value of the selected octet is changed by rotating the
Knob.
・
Selection migrates to the next octet by pressing the Knob.
・
If an unavailable address is selected, it is skipped or adjusted.
・
If the value other than 255 is configured in an octet, 0 is
configured in subsequent octets and the edited contents are
confirmed.
・
By holding the Knob while the 3rd octet or later is selected, the
2nd octet can be restored again.
Combination check of the Host IP Address and Subnet Mask
configurations on save
1. If all bits of the host address in Host IP Address are 1 (the
broadcast address), "Combination Err 1" is displayed for 2
seconds and the previous display is restored.
2. If all bits of the host address in Host IP Address are 0 (the
network address), "Combination Err 2" is displayed for 2
seconds and the previous display is restored.
3. The repeater restarts to reflect the configuration after
"Complete" is displayed if nothing is wrong with the
combination.
32