Kenwood NXR-1700 Function Reference page 30

1 FUNCTIONS AND PANEL LAYOUT / 1.3 OLED display
Push Hold of the Knob
If the Knob is pressed for 500 ms or longer, Hold occurs. If it is less than 500 ms, Push occurs.
A short cut to the Normal display becomes possible by Hold.
Display Category
Level
3 Information
Display
Menu Selection
4 Parameter
Selection
Note
The Push operation is disabled while the power is turned ON by Test PTT Control (the PTT control for a voice call
・
used for testing). The displayed Level does not return to Level 3.
Display Category
Level
4 Items for which the
parameter change is
executed according to
the Knob rotation
Items for which the
parameter change is
executed by Push
Items for which the
process is executed by
Push
FUNC (E)/ Ver 2.00
Table 1-5 The Return Operation for Migration between Levels
Description
Channel Information
Repeater Information
Network Information
Control Menu
Items for which the parameter change is
executed according to the Knob rotation
Items for which the parameter change is
executed by Push
Table 1-6 Operation for Determination at Level 4
Description
Test PTT Control
Volume Adjust
MIC Gain
Brightness
Channel Select
Slot Select
Repeat Disable
Take Over
Monitor On
Squelch On
Remote Access Control
Scroll Direction
Power Off
USB Port Recovery
Operation for
Determination
Knob Rotation
Push
29
Operation Action
Push Returns to
Level 2.
Back
Home Returns to
Level 1.
Push Returns to
Level 3.
Exit
Action
Executes by setting the
position to ON.
Changes a level by
adjusting the relative
position of the Knob.
Changes by hovering over
the value selected by the
Knob and performing the
Push operation.
Executes.