Reading The Configuration Data From The Repeater - Kenwood NXR-1700 Function Reference

2 GETTING STARTED / 2.3 Reading the Configuration Data from the Repeater

Reading the Configuration Data from the Repeater

2.3
Embedding a Message in the Repeater (Embedded Message)
The message can be written to the repeater by using KPG-D7.
Embedded Message
Embedded Message is the function to store a maximum of 64 alphanumeric characters in the repeater. Unique profiles
of the repeater, such as a serial number and a file name of configuration data written to the repeater, can be stored in
the repeater.
The message can be written to the repeater by using KPG-D7. The embedded message is stored as a part of the
configuration data in the repeater.
The embedded messages can be read from the repeater by using KPG-D7.
Configuration using KPG-D7
Configuring Embedded Message ( Edit > Embedded Message)
・
Embedded Message with Password
Embedded Message with Password is the function to store in the repeater a maximum of 64 alphanumeric characters
with a password.
Unique profiles for a repeater, such as a serial number and a file name of configuration data written to the repeater, can
be stored in the repeater with a password.
The message and the password can be written to the repeater by using KPG-D7. Embedded Message with Password
is stored as data separate from the configuration data, not as part of the configuration data.
The password must be entered to write a message. The message cannot be written to the repeater unless the correct
password is entered. The embedded messages can be read from the repeater by using KPG-D7.
Configuration using KPG-D7
Configuring Embedded Message with Password ( Edit > Embedded Message with Password)
57
FUNC (E)/ Ver 2.00