Kenwood NXR-1700 Function Reference page 121

7 DMR DIGITAL COMMUNICATIONS / 7.8 Limiting the IDs for Repeat Transmission (User List (GID)/ User List
(UID))
Note
Enter the GID Range list from the GID Range (Min). If a GID is not entered in GID Range (Min), the GID Range (Max)
・
cannot be entered.
If a GID is entered in GID Range (Min), the same GID is automatically entered in GID Range (Max).
・
"ALL" and "Unaddress" of GID Range List can only be configured in GID Range (Min).
・
・ If "Unaddress" is configured in GID Range (Min), the repeater is permitted to use the codes $FFFFE0 to $FFFFEF.
・ If "ALL" is configured in GID Range (Min), the repeater is permitted to use the codes $FFFFF0 to $FFFFFF.
The GID number which is redundant with the already configured GID number between GID Range (Min) and GID Range
・
(Max) cannot be entered.
Configuration using KPG-D7
Configuring GID Range List ( Edit > User List > GID Range List)
・
Configuration using Web Tool
・ Configuring GID Range List ( Edit > User List > GID Range List > GID Range List)
FUNC (E)/ Ver 2.00
Figure 7-3 GID Range List
120