4 TRANSMISSION/ RECEPTION/ REPEAT / 4.13 Operation Mode
Note
・
If the transmit frequency and receive frequency are the same, the Duplex behavior, Repeat behavior cannot be
performed.
If Channel Type is DMR and Mixed, Simplex and Duplex cannot be configured.
・
TA Direct can be configured only in DMR mode.
・
・
On a channel of TA Direct, a signal of the transceiver in the repeater mode is not received.
On a DMR standby channel of anything other than TA Direct, a signal of the transceiver in Direct Mode is not
・
received.
TA Direct only supports the transmission with Dual Slot Direct Mode disabled for the transceiver.
・
・
TA Direct can be configured if the transmit frequency and receive frequency are the same.
TA Direct only supports Slot 1. Therefore, if a call is made from a Console, the call needs to be made on Slot 1. If
・
a call from a Console is made on Slot 2, the call is rejected.
Configuration using KPG-D7
Configuring Operation Mode ( Edit > Channel Information > Chanel Edit > Operation Mode)
・
FUNC (E)/ Ver 2.00
93