Resetting The Piece Counter; Setting The Bobbin Counter - Dürkopp Adler 806N-111 Operating Instructions Manual

Programming

5.5.2 Resetting the piece counter

The piece counter counts the number of sewn pockets or the number of
sewing cycles performed. It can be reset at any time between two sewing
cycles.
To reset the piece counter:
1. Press the Reset piece counter button.
 The piece counter is reset to "0".
 The piece counter starts counting again after the next sewing cycle.

5.5.3 Setting the bobbin counter

The bobbin counter indicates the amount of thread remaining on the
bobbin. The menu for changing the bobbin is also displayed here.
Information
The capacity of the bobbin varies depending on the type of thread and ma-
terial to be sewn.
The number of stitches to be entered must be estimated. Experience
gained from sewing a given product will help you gradually approach a
more accurate estimate of the capacity.
To navigate to the bobbin counter and bobbin change menu:
1. Press the Set bobbin counter button.
 The machine enters the Safe stop mode.
 The inner stacker bar opens.
 The display switches to the Bobbin menu.
Fig. 68: Setting the bobbin counter (1)
① ② ① ②
(1) - Number of stitches (2) - Stitch counter
80 Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020