Setting The Handwheel Into Position - Dürkopp Adler 867-M PREMIUM Service Instructions Manual

Working basis
Locking the machine in place
To lock the machine in place:
1. Remove the plug from the locking opening (4).
2. Turn the handwheel until the appropriate arresting groove (1) or (2) is
3. Insert the locking peg (3) with the appropriate end into arresting
Removing the lock
To remove the lock:
1. Pull the locking peg (3) out of arresting groove (1) or (2).
2. Insert the plug into the locking opening (4).

3.7 Setting the handwheel into position

Fig. 15: Setting the handwheel into position
(1) - Graduated scale
For some settings, the graduated scale on the handwheel has to be
moved to a certain position.
To set the handwheel into position:
1. Turn the handwheel until the specified number on the graduated
Service Instructions 867-M PREMIUM - 03.0 - 05/2017
in front of the locking opening (4):
• Small arresting groove at handwheel position 0°
• Large arresting groove at handwheel position 200° – 205°
groove (1) or (2).
①
②
scale (1) is next to the marking (2).
(2) - Marking
25