Performing A Test Run - Dürkopp Adler 806N-111 Operating Instructions Manual

6. Firmly press the carriage (11) once onto the edge folding frame to
7. Firmly push the hose onto the hose connecting piece (8) in the center.
8. Place the coupling strip (9) onto the horizontal hole strip.
9. Turn the screw handle (10) to the right until the coupling strip (9) is
10. Press the Confirm button
 You will hear a short clicking sound.
 The parts in the edge folding station are secure and rigid again.
 The machine is at a safe stop.
 The Start screen is displayed on the control panel.

4.13 Performing a test run

You can perform the sewing cycle once, step-by-step, to check that every-
thing is correctly fitted and adjusted.
To perform a step-by-step sewing cycle:
1. Navigate to user interface 1 ( p. 74).
2. Press the Global parameters
 The display switches to user interface 2.
3. Press the Work step by step button
 The button is now highlighted in green. The button is also displayed
4. Press Button 1 to move one step forwards.
5. Press Button 2 to move one step backwards.
 Each step is executed individually in this manner.
 You must deactivate the Work step by step button
50
produce a proper connection.
securely connected to the edge folding frame.
on user interface 1.
face 2 in order to return to a normal sewing cycle.
.
button on user interface 1.
on user interface 2.
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
Operation
on user inter-