Multi Test - Dürkopp Adler D867 e-con Service Instructions Manual

19.8.3 Multi test

This parameter makes it possible to test whether, for example, magnets,
drives, and inputs or outputs are functioning correctly. A list of the neces-
sary allocations can be found in the  Parameter list of the machine.
Icon
Test Output sub-item
Check of outputs according to wiring diagram.
To test the outputs:
1. Turn on the check box (
 The output is activated.
Test Input sub-item
Test of the inputs according to the wiring diagram.
To check the inputs:
1. Press the input.
 The display switches automatically to the corresponding input in the
188
Menu items
Test Output
Test Input
Test analog Input
Test Sewing Motor
Test Stepper Motor
Test Pedal
Test Material Thickness Sensor
Test Loop control
pick list on the control panel.
The status (on/off) is highlighted with a color.

) at the desired output.
Service Instructions D867 e-con - 00.0 - 08/2023
Programming
Value range
 p. 188
 p. 188
 p. 189
 p. 189
 p. 189
 p. 190
 p. 191