Programming
5.5.5 Activating middle slide automatically forward
The middle slide is at the front when a new sewing cycle begins.
Activating mode Middle slide automatically forward
To activate the mode Middle slide automatically forward:
1. Press the Middle slide automatically forward button
The button is highlighted in green.
The mode Middle slide automatically forward is activated.
2. Press the Middle slide automatically forward button
This exits the mode.
The button is no longer highlighted in green.
This setting is deleted after switching off the machine, after loading a dif-
ferent seam program or after an EMERGENCY STOP.
Operating mode Middle slide automatically forward
To operate the mode Middle slide automatically forward:
1. Place the pocket blank on the middle slide.
2. Place and align the basic part on the edge folding station.
3. Fasten the basic part by pressing button 1 or the pedal.
The air suction is now switched on.
4. Press button 1 to start the sewing process.
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
exit this mode.
CAUTION
Risk of injury from sharp parts!
Cutting.
Do NOT reach into the area of the middle slide.
.
again to
83