Assembling The Pedal And Setpoint Device - Dürkopp Adler 868-M Operating Instructions Manual

Setup
Operating Instructions 868-M - 01.0 - 12/2020
5. Screw a second nut (8) from the bottom onto the thread at
the end of the reel stand tube (11).
 The reel stand is now securely assembled to the tabletop.
7.6

Assembling the pedal and setpoint device

Fig. 79: Assembling the pedal and setpoint device (1)
(1) - Pedal
To assemble the pedal:
1. Fit the pedal (1) on the cross strut (2) and align it in such a
way that the middle of the pedal is under the needle.
2. Tighten the pedal (1) on the cross strut (2).
① ②
(2) - Cross strut
117