Advertisement
Interference Analyzer (SA Mode) – Option 236
Record/Playback (SA Option)
—
—
—
—
— Sep.22... is the date and time of recording.
When GPS is enabled`, the current location and elevation are annotated at the
bottom of the playback display. Learn more in
page
If Recording or Playback is not occurring when you think it should, check
the following:
— Is the sweep in HOLD? (upper-left annotation)
— Is Recording or Playback Paused? (mid-left annotation)
— Is the Record or Playback Interval set too long? (Configuration settings.)
How to Record a Session
— Press Trace 6
— Then
— SA Only: Optionally set resolution (points). Learn how in
— Then either:
— Then
— Then
REC
During recording, choose from the following:
—
—
Keysight N9915-90020 User's Guide
AutoSession
is an auto-generated name for sessions.
auto-generated number, incremented with each new session. The name
can be changed using Manage Sessions. Learn more in
on page
553.
92/95
is the current and total trace number: currently trace is 92 of 95 total
traces.
state 4/5
is the current and total state tag or user tag number: 4 of 5 total
tags.
*
(Asterisk) indicates that a state has changed.
User Tag has been inserted.
787.
Record Playback
page
203. This can NOT be changed after a session is opened.
New Session
—
OR
—
Recall Session
then
Recorder Player
Record
is displayed in the left of screen graticules.
Pause Resume
Temporarily halts recording until pressed again. The
incoming trace continues to sweep. Press again to continue recording.
Stop
Immediately stops recording. Then choose from the following:
#
(Pound) indicates that a
"GPS – Distance Settings" on
Open
and select a session.
02
is the
"Manage Sessions"
"Points " on
545
Advertisement
Chapters
