Advertisement
Indoor and Outdoor Mapping – Option 352 (Requires Spectrum Analyzer Mode (Option
233), and GPS Receiver (Option 307))
Troubleshooting
— Then
If these are large recordings on a device, it could take several seconds for
the FieldFox to display the list.
end of the recording is reached, playback begins at the start of scan and
continues to loop indefinitely.
During playback, choose from the following:
—
—
—
—
—
Troubleshooting
This section contains the following:
—
518
Data Logging
Record Save/Recall
>
Recall Log File
— Then
highlight the file to be played.
——Then
Recall File
Back
——Then
Play
— Then
to playback your Table data.
is displayed in the left of screen graticules during playback. When the
Pause Resume
Temporarily halts playback. Then choose from the following:
Pause Resume
—
Stop
Immediately stops playback. Then choose from the following:
Play
—
Start playback from start of scan.
Recall Log File
—
Opens a list of stored data files.
Select a file to playback.
Recall File
—
Back
—
Cursor Position
use this softkey to move the data log play cursor in the
current data log being played (i.e., Cursor Position is active only when
playback is paused).
This softkey is only available in Channel Scanner and Phased Array Antenna
modes (i.e., The Cursor Position softkey is not available for OTA mode).
Red Limit
to edit the red limit dBm value.
Blue Limit
to edit the blue limit dBm value.
"General Troubleshooting"
use the Use the RPG or the
Press to continue playing.
Keysight N9915-90020 User's Guide
arrow keys to
Advertisement
Chapters
