Advertisement
5G Rapid Prototype Phased Array Antenna – Option 360
How to Use Data Logging/Playback (Option 360)
— Then
Learn more, refer to the
How to Playback a Data Log
— Press Trace 6
— If the session is already open, skip the following step. Otherwise:
— Then
If these are large recordings on a device, it could take several seconds for
the FieldFox to display the list.
end of the recording is reached, playback begins at the start of scan and
continues to loop indefinitely.
During playback, choose from the following:
—
—
—
458
Record Save/Recall
Device
(Internal (default), SD Card, or USB)
— Then
— Then
File Type
(CSV, DREC (Option 360 only), or KML (default))
Chapter 33, "File
Data Logging
Record Save/Recall
>
— Then
Recall Log File
highlight the file to be played.
——Then
Recall File
Back
——Then
Play
— Then
to playback your Table data.
is displayed in the left of screen graticules during playback. When the
Pause Resume
Temporarily halts playback. Then choose from the following:
Pause Resume
—
Stop
Immediately stops playback. Then choose from the following:
Play
—
Start playback from start of scan.
—
Recall Log File
Opens a list of stored data files.
Select a file to playback.
—
Recall File
Back
—
Cursor Position
use this softkey to move the data log play cursor in the
current data log being played (i.e., Cursor Position is active only when
playback is paused).
Management".
use the Use the RPG or the
Press to continue playing.
Keysight N9915-90020 User's Guide
arrow keys to
Advertisement
Chapters
