SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)FUTURE
SA Mode Settings
1. Press
2. Press
3. Press Scale/Amptd >
4. Press
Optional:
— Press
—
About Antenna and Cable files
— Cable files are saved and recalled from the Cables folder.
— Antenna files are saved and recalled from the Antenna folder.
— To DELETE Cable or Antenna files, use the Manage Files feature. Learn more
— If the folder does not already exist on a USB or SD card, it is created
— All Antenna and Cable files are saved and recalled as *.csv files, which
168
Done
to close the Antenna/Cable Editor.
Antenna Off On
Then choose your final measurement amplitude unit, under Scale/more. If
you selected either
dB /m
should see this list of available Field Strength units
—
dBµV/m
== dB micro Volts per meter
—
dBm/m^2
== dBm per meter squared
—
V/m
== volts per meter
—
W/cm^2
== watts per cm squared
—
W/m^2
== watts per meter squared
—
dBµA/m
== dB micro Amps per meter
—
dBG
== dB gauss
—
dBpT
== dB pico tesla
Back
>
Back
>
Save Antenna
the specified Storage Device. Enter a filename using the FieldFox labeler
(learn more in
"How to use the FieldFox labeler " on page
about Antenna and Cable files below.
Recall Antenna
the specified Storage Device.
Storage Device
Changes the device used to save or recall files. Choose
from Internal (default setting), USB (must be connected) or SD card. This is
a different setting from the Save/Recall Storage Device setting.
in
"Manage Files" on page
automatically before storing the file.
allows them to also be read by spreadsheet programs.
> On.
or
dB S/m
for the Antenna Factor unit, you
More
Unit dBuV/m
and choose from:
>
or
Save Cable
or
Recall Cable
to load an Antenna or Cable file from
826.
Keysight N9915-90020 User's Guide
to save your changes to
820). Learn more