Advertisement
Indoor and Outdoor Mapping – Option 352 (Requires Spectrum Analyzer Mode (Option
233), and GPS Receiver (Option 307))
How to Set Up Mapping Settings
Figure 16-17 Using Maps Explorer to Set the Red and Blue Power Limits
Figure 16-18 Display Example: Color Coded Bar Scale Before Selecting x6 Colors
Figure 16-19 Display Example: Color Coded Bar Scale After Selecting x6 Colors
6. Verify you have enabled GPS. Refer to your measurements procedure and
7. Then press Esc >
Keysight N9915-90020 User's Guide
c. Optional: Then
Preferences
Discrete Colors
to
"GNSS (GPS+) and GPS" on page
Back
Logging
>
Record Save/Recall
— Then
File Folder Default System
—
Default
Discrete Colors
>
and change value as desired (Maximum = 6).
795.
> Trace 6 >
More
(required for OTA only) >
– Sets the default User Folder path:
Discrete Colors
>
>
Data
499
Advertisement
Chapters
