Advertisement
System SettingsFUTURE
Preferences
Startup Option
The Startup Option setting determines the behavior of the FieldFox after a
restart.
— If the Startup Option is set to
— When the Startup Option is set to
See
How to setup Startup Option
1. Press System 7 >
2. Then scroll to Global Settings > Startup Option and press Edit.
3. Then repeatedly press the
Display
Choose the Display values (Display Colors, Trace Width, Brightness, Title
Enabled, Title). See
How to select Display values:
1. Press System 7 >
2. Then use arrow softkeys (
3. Then
Keysight N9915-90020 User's Guide
An instrument can never power up for the first time in LAST.
If line power to the instrument is interrupted, by any of the following, Last
Power Off State may not work properly:
– If there is no battery and the line cord plug is removed
– If the test rack/bench power is switched off power.
For proper operation,
down the instrument via softkeys Mode > More. . . (Varies with number of
Options loaded) > "Shut down" | "Restart".
FieldFox was set to before a reboot is displayed on power up.
Startup Mode selected is the first mode visible on startup and is Option
dependent. If User Preset is set to ON, it is loaded on power up.
"User Preset" on page
Preferences
choices.
—
User (See Startup Mode)
—
Last Power Off State
"Display (Settings)" on page
Preferences
Edit
for each of the following:
— Display Colors
— Indoor (default)
Last Power Off State
depends on your shutting
Last Power Off State
User (See Startup
768.
Preferences
>
Startup Option
to toggle through the available
or
Preferences
>
) or the knob to select Display
the mode that the
Mode), (Default) the
769.
785
Advertisement
Chapters
