Advertisement
RTSA (Real-time Spectrum Analyzer) Mode—Option 350
RTSA Mode Settings
How to select Baseband
1. Press Freq/Dist >
2. Then
3. To complete the Baseband enabling (activation) process:
— The IF path must be Narrow 10 MHz.
— The RF frequency range span (between start and stop frequencies) must
— The Center Frequency must be ≤6.5 MHz
Figure 10-7
Baseband Display Annotation When Enabled (RTSA Mode)
Acq Time
Use the
update in Density or Real-time Spectrum measurements.
274
More
Baseband [Disabled]
— Verify BW 2 >
IF Path
include a spectrum that is ≤10 MHz.
— Press Freq/Dist >
— Press Freq/Dist >
Acq Time
setting to adjust acquisition time interval for each trace
Press to Enabled (Default == Disabled).
is set to [Narrow].
Freq Span
10 MHz.
Center
6.5 MHz.
Keysight N9915-90020 User's Guide
Advertisement
Chapters
