Advertisement
System SettingsFUTURE
Service Diagnostics
3. Press
How to restore files
This procedure restores user files from a USB or SD card. See also
files" on page 807
Restoring files overwrites the existing user data on the FieldFox.
If you backup multiple versions of the user files, the FieldFox appends a
"_#" to each subsequently stored file. During restore, the file with the
highest appended number is loaded into the FieldFox
If your stored any user files to a USB or SD card, this procedure restores those
files.
From the initial Installer menu:
— Press
— Then
— A message is displayed: "This option will COMPLETELY ERASE
— Then
— Then choose either SD Card or USB
Service Diagnostics
When the FieldFox is powering up, the firmware does a very high level verification of the
hardware components. This high level verification does
the internal hardware components. The FieldFox will generate an error message, if the hardware
fails the verification. To learn more, refer to the
Guide for your FieldFox.
Keysight N9915-90020 User's Guide
Cancel
to exit without backing up your files and returning to the
initial Installer menu.
.
Utility
Cancel
to exit without restoring your files and returning to the initial
Installer menu.
Or
Restore Data
Press
existing user data. ARE YOU SURE?"
No
to return to the previous menu without restoring files.
Or
Yes
Press
A progress bar and a message is displayed: "Restoring user data..."
not
involve applying any power to any of
FieldFox Programming Help
"How to backup
and to the Service
811
Advertisement
Chapters
