Advertisement
SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)FUTURE
How to Set Up EMF Settings (Requires EMF (Option 358), GPS (Option 307), and SA
Mode (Option 233–Mixed Analyzers))
7. Move the antenna to the correct physical location/position for your
8. Antenna corrections: Press
9. When done press <Back
10. Press Meas Setup 4 >
11. Repeat steps
12. Sum Channel Power: Press
Other softkey choices are Restart, Corrections,
Traces Blank
Editing Antenna Correction Factors and Adding New Antenna Factors
This section contains two procedures illustrating how to edit the Antenna
Factors settings table values.
If New is selected under the X, Y, or Z Antenna or Cable softkey menu,
whatever antenna or cable factors that have been imported as the default
values and are displayed in the Settings table.
1. Selecting an antenna softkey menu:
238
measurement.
OFF
to
ON
– learn more, refer to
page
164.
updated with antenna's current position channel power values and display
trace.
X axis channel power (CHANPOW) data and trace are frozen in the upper
right of the EMF Channel Power window.
through
5
After pressing the Axis Y softkey, the Axis-X Antenna softkey changes to
read Enabled (Axis-X measurement saved) and because the Y-Axis is now
the active antenna (measuring data). Axis-Y softkey behaves similarly after
it is saved and Axis-Z is pressed.
now displays the summed values of the 3 axes.
View.
Press Scale/Amptd >
softkey menus:
—
X axis Antenna
triaxial antenna.
—
Y axis Antenna
triaxial antenna.
—
Z axis Antenna
triaxial antenna.
—
Cable
– to open a softkey menu to edit the cable factors for an
antenna setup.
Corrections
X-Axis Antenna Off
>
"How to Use the Antenna Softkeys" on
EMF Active
Save Axis Result
>
for the axis Y and Z.
10
Save Axis
Result. The Live Sum CHP value
Clear Saved
More
Corrections
then choose one of these
>
– to open a softkey menu to edit the X axis of a
– to open a softkey menu to edit the Y axis of a
– to open a softkey menu to edit the Z axis of a
Keysight N9915-90020 User's Guide
Antenna
>
– the display is
Results, and
Save
Advertisement
Chapters
