Advertisement
DTF (Distance to Fault) Measurements
How to make DTF Measurements
9. Either press
10. Connect the start end of the DUT to the FieldFox.
11. Press Meas Setup 4 then
Keysight N9915-90015 User's Guide
Edit/Save/Recall Cables
the Velocity Factor/Cable Loss of the DUT using the
Cable Loss
keys.
setting is False, then you may see Alias faults on the screen. Learn more
on
page
73.
then
Recall
Settings
then
Next
Page. If the Alias-free Range
Cable, or directly enter
Velocity
Factor and
65
Advertisement
Chapters
