Advertisement
Over–the–Air Measurements (OTA) – LTE FDD Option 370, LTE TDD Option 371, 5G TF
Option 377, 5G NR / 5G NR EVM Conducted Option 378
How to Set Up Over–the–Air (OTA) Mode Settings
Figure 13-26
Spectrum and Table Type (SSB Offset Detection Softkeys) – 5G NR
Freq/Dist > Freq Mode > Chan or Freq
If Freq then: Meas Setup > More > SSB Offset Detection
If Chan then: Meas Setup > More
Step 3. Modify Scale and the Display Color Bar Settings
To assign colors to low and high power values:
1. Press
2. Press
3. And, then press
392
Scale/Amptd
>
color.
Blue Limit
to set low power values and to set the color.
System
or other display colors. See also
Red Limit
to set high power values and to set the
Display
Display
>
>
Chapter 31, "System Settings."
Keysight N9915-90020 User's Guide
Colors, to set Indoor, Outdoor,
Advertisement
Chapters
