Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Keysight Technologies CXA
Summary of Contents for Keysight Technologies CXA
- Page 1 Keysight CXA/EXA/MXA Signal Analyzer Option PRC - Portable Configuration Installation Note...
- Page 2 The information contained in this document is subject to change without notice. Keysight Technologies makes no warranty of any kind with regard to this material, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
- Page 3 Option PRC, Portable Configuration Installation Kit Option PRC, Portable Configuration Installation Kit Products Affected: CXA N9000A EXA N9010A MXA N9020A Serial Numbers: To Be Performed By: (X) Keysight Service Center (X) Personnel Qualified by Keysight (X) Customer Estimated Installation Time: 0.5 Hours...
-
Page 4: Tools Required
Option PRC, Portable Configuration Installation Kit Contents Description Keysight Part Quantity Number Installation Note This note Trim Strip, Top with Bumper W1312-40004 Bumper Assembly, Front W1312-40020 Bumper Assembly, Rear W1312-40021 Hole Plug, Strap Handle W1312-40024 Cover, Impact W1312-40025 Hole Plug, Bottom Foot W1312-40032 Bail Handle Assembly W1312-60036... -
Page 5: Installation Procedure
Installation Procedure Installation Procedure 1. Refer to Figure 1. Locate and remove both strap handle assemblies (1) (N9020-60002). Each handle is attached to the instrument case with two Torx 20 screws. Set aside the two strap handle assemblies as they are no longer needed. Figure 1 Strap Handle Removal 2. - Page 6 Installation Procedure 1. It is recommended that all of the parts that have just been removed be NOTE stored away somewhere together in case you need to return the instrument to the bench top configuration. 2. The screws attaching the four rear bumpers are what hold the instrument cover in place.
- Page 7 Installation Procedure 8. Refer to Figure 3. Locate the top trim strip on the front panel. The top trim strip snaps into place. Use a small flathead screw driver to remove the top trim strip as shown. Ensure that you do not scratch the front panel.
- Page 8 Installation Procedure Figure 4 Side Trim Strip Removal 10.Locate the top trim strip (W1312-40004) from the kit. Snap top trim strip into place in the cavity on the top of the front frame. 11.Refer to Figure 5. Locate four front bumpers (1) (W1312-40020) and eight screws (0515-0435) from the kit.
- Page 9 Installation Procedure Figure 5 Front Bumper Installation Installation Note N9020-90133...
- Page 10 Installation Procedure 12.Refer to Figure 6. Locate Bail Handle assembly (1) (W1312-60036) and four screws (0515-0435) from the kit. Adjust handle as shown. Snap handle into place on the instrument front frame. Secure the Bail Handle assembly with screws. Torque to 21 in-lbs. Figure 6 Bail Handle Installation 13.Locate Impact Cover (W1312-40025).
- Page 11 Performance Testing Required None End of installation For assistance, contact your nearest Keysight Technologies Sales and Service Office. To find your local Keysight office access the following URL, or call the following telephone number: http://www.keysight.com/find/assist 1-800-829-4444 (8 am - 8 pm ET, Monday - Friday)
- Page 12 This information is subject to change without notice. © Keysight Technologies 2009-2015 Edition 1, April 2015 N9020-90133 www.keysight.com...
Need help?
Do you have a question about the CXA and is the answer not in the manual?
Questions and answers