Keysight Technologies C Series User Manual page 34

Preparing for Initial Use of Your New FieldFox
FieldFox High Temperature Protection
Entering Auto Protect (Maximum) Threshold Temperature Mode
At above approximately 75°C, the FieldFox enters (Maximum) Auto Protect
temperature control mode by displaying the "Entering Auto Protect mode...".
See also
When you enter the Auto Protect (Maximum) Threshold, the following message
is displayed:
"Entering Maximum Auto Protect mode for thermal management"
When temperature reaches the maximum protection threshold (~75°C), some
applications take additional measures.
Figure 2-1 Entering Auto Protect mode message (above ~64°C)—(Displays for 3 sec)
Exiting Maximum Auto Protect Threshold Temperature Mode
When the temperature drops to approximately 73.5°C, a message is displayed
indicating that the FieldFox is leaving Temperature Control Mode and normal
operating settings are restored (refer to
page
When you exit the Auto Protect (Maximum) Threshold control mode, the
following message is displayed:
"Temperatures reduced, exiting Maximum Auto Protect mode"
Figure 2-2 Exiting Maximum Auto Protect mode message—(~62.5°C)
34
Table 2-1 on page
36.
36.
Figure 2-2). See also,
Keysight N9915-90020 User's Guide
Table 2-1 on