Advertisement
System SettingsFUTURE
Preferences
Settings
"Quick Save Editing" on page 789
"Group Save File Types Editing" on page 790
"CAT (Distance Units)" on page 791
"CAT/NA" on page 792
"SA" on page 792
"Scripting" on page 751
"Discrete Colors Softkey Menu" on page 794
menu.
Save and Reset Preferences
All preference settings can be made at one time from the Quick Settings table.
All settings that can be saved as preferences (except Battery Saver and Startup
Mode) can also be made from individual softkey selections throughout the
FieldFox menu structure. However, they remain through a FieldFox shut down
ONLY when the current settings are saved as preferences.
The table above shows a list of all of these settings and where they are
discussed in this User's Guide.
How to save current settings as Preferences
1. Using softkeys, configure the settings as you would like them to remain.
2. Press System 7 >
3. Then
4. Press
Language
Choose the language in which to display FieldFox softkeys and other
messages. Select Save Current Settings to set this language as a preference.
— Press System 7 >
Global Settings (Overview)
Choose the Global Settings values (Language, Battery Saver, and Startup
Mode). See also
782
Preferences
Save Current Settings
saved.
Reset Preferences
Preferences
See also,
"How to select a Language" on page
"Quick Settings Table" on page
- Part of Preferences softkey
There is a beep when your settings have been
to restore the factory default settings.
Language
>
783.
780.
Keysight N9915-90020 User's Guide
Advertisement
Chapters
