Keysight Technologies C Series User Manual page 164

SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)FUTURE
SA Mode Settings
Selecting and Viewing Corrections
1. Press Scale/Amptd >
2.
3.
4. <Back To return to previous softkey menu.
How to Use the Antenna Softkeys
The following menu appears when any of the above softkeys are pressed:
—
—
—
164
Cable Off
— – Opens a softkey menu to enable/disable a cable and edit,
save, create a new cable description table, recall, and set a storage
device location.
— More – Opens a softkey menu to View Corrections and set the
Amplitude Correction type for your antenna.
Learn more, see
More
— – Edit/Recall an Antenna file to be used to transmit.
RcvrSide Antenna Off / On
—
receive.
SrcSide Cable Off / On
—
Source side.
RcvrSide Cable Off / On
—
Receiver side.
View Corrections ON OFF
corrections. This is a composite of all cable/antenna corrections that are
currently applied. Available as a useful visual aid, the zero "dB" level (no
net correction) is mapped to appear at the -50 dBm on-screen level.
Amp Corr Select [Triaxial XYZ]
— Default Receiver side only antenna measurements.
— Src/Rcvr Split
to work with non-triaxial receiver and source side
antenna measurements.
— Triaxial XYZ
(default, when Channel Power is on and when a
compatible triaxial antenna's factors have been imported) for
measuring channel measurements and EMF.
Antenna ON OFF Cable ON OFF
or
Antenna/Cable.
Edit Antenna Edit Cable– Edit an Antenna/Cable Correction table. See
or
Using the Antenna/Cable Editor (below) for more information.
New
– Create a new Antenna/Cable. See Using the Antenna/Cable Editor
(below) for more information.
"Selecting and Viewing Corrections" on page
Edit/Recall an Antenna file to be used to
Edit/Recall a Cable file to be used on the
Edit/Recall a Cable file to be used on the
More > Corrections >
Turn ON and OFF Pink Trace - Antenna/Cable
- then choose one of the following:
– Turn correction ON or OFF for this
Keysight N9915-90020 User's Guide
More
164.