Line Loss And Velocity Factor - Keysight Technologies C Series User Manual

Fieldfox analyzers

Time Domain – Option 010

Time Domain (Transform) Settings

The Window setting applies to ALL traces.

How to make Window setting

— Press Measure Setup 4

— A settings table appears that allows you to navigate and select the

Any of the following four methods can be used to make this same Window

setting. Impulse Width values are calculated from the frequency span and

Kaiser Beta value.

Line Loss and Velocity Factor

By default, the FieldFox does NOT correct Time Domain measurements to

account for the inherent loss of a cable. However, to make more accurate

measurements, Line Loss and Velocity Factor should be considered.

Keysight N9915-90020 User's Guide

Transform Window

following settings. These settings are made exactly like those made on the

Transform Settings table. Learn how in

"Transform Settings Table" on

Impulse Width