Advertisement
System SettingsFUTURE
Preferences
Figure 31-6
FieldFox Frequency Converter (Freq Extend) On And Corrections (eCorr)
Enabled (RTSA mode shown; other compatible modes are similar.)
Preferences
FieldFox preferences are settings that survive a shut down. When your FieldFox
is turned OFF, then back ON, these settings remain. All preference settings can
be restored to their factory defaults. Learn how in
Preferences" on page
There are two ways to make FieldFox preference settings:
— From softkey selections throughout the FieldFox menu structure. Do this to
— From the Quick Settings table.
— Also, refer to:
Quick Settings Table
All preferences can be set from the Quick Settings table. They are immediately
saved as Preferences when
780
782.
temporarily try a setting, then press
in the next section.
"Audio (Volume) Control" on page 769
(Settings)" on page
769.
Save Current
Done
is pressed.
Keysight N9915-90020 User's Guide
"Save and Reset
Preferences. Learn how
and
"Display
Advertisement
Chapters
