Advertisement
NA (Network Analyzer) Mode
NA Mode Settings
—To move a marker, press Marker, then Marker, then scroll to the marker
number to be moved. The new marker position can NOT be saved with the
A or B display state.
— Settings that are NOT listed above are NOT affected by the recalled
display states.
— Changes to the above settings outside the Big Readout menu will be
overwritten when Big Readout (A or B) is selected. For example, suppose
the display format for the B state is Log. If you change the display format
to Lin using the standard menu (Meas 1, Format), the setting will show on
the display. But if you then use the Big Readout (A | B | OFF) setting, when
B is recalled, the Lin setting will be overwritten with the original Log
setting.
Keysight N9915-90020 User's Guide
—Trace # - The marker# is created on this trace. Tr1 is selected by
default. The corresponding Num Traces must first be selected. For
example, to create a marker on Trace 3, first select Num Traces = x3.
—Format – Format for the marker readout. Select Default to make the
marker readout format the same as the display format. Default is
selected by default.
— Mkr Tracking – ON: Select the parameter to track on the standard
Marker Search menu. OFF is selected by default. When set to ON,
Peak tracking is set by default. Learn about Marker Tracking in
"Marker Functions" on page
— State – Choose from Normal, Delta, or OFF. The default marker (1) is
created in Normal. Learn more in
—Enabled – Turns the Big Readout of the corresponding marker ON and
OFF. The default marker (1) is set ON by default.
747.
"Marker Functions" on page
747.
111
Advertisement
Chapters
