Download Print this page

Keysight Technologies C Series User Manual page 497

Fieldfox analyzers

Advertisement

Indoor and Outdoor Mapping – Option 352 (Requires Spectrum Analyzer Mode (Option
233), and GPS Receiver (Option 307))
How to Set Up Mapping Settings
Option 352 Outdoor Maps Setup Procedure
Outdoor mapping requires GPS Option 307.
IMPORTANT!
85571A-028 (28 GHz 5G Phased Array Antenna) accessories not suitable
for use in wet locations.
Saving and importing maps can be done now or after the outdoor map
locations have been measured. Before you can save and import maps via
the internet, your PC requires the FieldFoxMapping software. Refer to
"How to Install Node.js and Running the FieldFox Mapping Software" on
page
1. Set up your measurements in Channel Scanner, OTA, or Phased Array
2. Plan the area you want to map with GPS Option 307 enabled.
Saving and importing maps can be done now or after the outdoor map
locations have been measured. Refer to
Running the FieldFox Mapping Software" on page
Keysight N9915-90020 User's Guide
478.
Antenna. See also,
Chapter 13, "Over–the–Air Measurements (OTA) – LTE
FDD Option 370, LTE TDD Option 371, 5G TF Option 377, 5G NR / 5G NR
EVM Conducted Option 378,"
312)."
One or more are required:
— For setting up GPS Option 307, refer to
Settings,"
and then
— For setting up a phased array antenna, refer to
Rapid Prototype Phased Array Antenna – Option 360."
— For setting up a USB antenna, refer to
(Full Capability Requires EMF Option 358, and either SA mode
(Option 233 Mixed Analyzers) or OTA—5G NR / 5G NR EVM
Conducted Option 378)."
a. Optional (Can be done later): Save mapping pictures to the FieldFox
using USB storage device, SD card, or connect to LAN with internet
and download. Refer to
FieldFox Mapping Software" on page
SCPI in the FieldFox Programming Help
https://www.keysight.com/us/en/lib/resources/service-manuals/k
eysight-fieldfox-library-help-and-manuals-2153870.html
Keysight FieldFox Library, Help and Manuals (near bottom of page).
b. Optional (Can be done later):
and
Chapter 28, "Channel Scanner (Option
Chapter 31, "System
"GNSS (GPS+) and GPS" on page
Chapter 15, "USB Antennas –
"How to Install Node.js and
"How to Install Node.js and Running the
478. For FTP, refer to :MMEM
795.
Chapter 14, "5G
478.
(via
495

Advertisement

loading

This manual is also suitable for:

N9912cN9913cN9915cN9933cN9934cN9935c ... Show all